XLPower 4020 motor
Found Pages

  • XLPower 4020 rewinding 007.jpg

    Story about an XLPower 4020 motorExpert level of RC heli modelling: motor rewinding

    I bought an XLPower 4020 motor to test it in my Logo 480 xxtreme instead of the existing Scorpion 4015-1070KV. Because there isn't too much room under the canopy of the 480, I decided to cut the wires back a little bit, then I noticed that the 2 × 12 0.42mm wires are soldered and cleaned up as much as it's required originally. After shortening the wires I could not put new connectors on so decided to rewind the motor.

    Szakács, Zoltán
    28 March 2019