XLPower WraithE goes to Japan
Presented at the Final of 3DX Japan

The 3DX Japan Final will be taken in place tomorrow in Utsunomiya, Japan. And one of the main attraction next to the competition is going to be the presentation of XLPower Wraith E . The new XLPower F3C helicopter is about to arrive.

The development phase of the helicopter was finished in last month, and now the helicopter is ready to go. This is the first F3C standard helicopter from XLPower, which will be available very soon.

As it's known, the F3C helicopter is a 760 class model, which can be ordered with different canopies and colours. The kit will come with no blades.

The belt driven helicopter can fly with 720-760 mm blades alongside the 105-115 mm tail blades. The total weight is 5600 g with 730 g batteries. XLPower uses the fast detach battery tray and 15 mm main shaft as well. The gear aspect ratio is 10.6:1:5.

The helicopter was supposed to be released in early 2019, but the development was much longer finally. The prototypes were flying more than 800 times so far, which means, the WraithE is a well tested helicopter. The most recent version is the canopy version, previously the F3C fuselage was seen on the photos.